This nozzle is available with two orifice size, 12mm and 19mm. Application : Hydrant system, wet or dry riser system
Diffuser Nozzle 800 (Jet / Spray)
Code No.
Type
Material
Finishing
Inlet Size
Flowrate @ 65 Psi
Throwrange @ 65 Psi
WRS100-LA- 065-NA
Standard
Aluminium Alloy to BS 1490
Natural
Male Instan taneous BS 336
800L/min-(Jet)
880L/min-(spray)
35m (Jet)
28m (Spray)
WRS102-LA- 065-NA
With branchpipe
WRS100-LA- 065-HL
With pistol grip
WRS100-GM- 065-NA
Standard
Copper Alloy to BS 1400
WRS102-GM- 065-NA
With branchpipe
WRS100-GM- 065-HL
With pistol grip
Jet / Spray Nozzle With Control Valve
Code No.
Material
Finishing
Inlet Size
Flowrate @ 65 Psi
Throwrange @ 65 Psi
WRS078-LA- 050-NA
Aluminium Alloy to BS 1490
Natural
2" BSP (male)
160L/min- (Jet) 140L/min- (Spray)
14m (Jet & Spray)
1-1/2" Jet / Spray Nozzle
Code No.
Type
Material
Finishing
Inlet Size
Flowrate @ 65 Psi
Throwrange @ 65 Psi
WRS103-LA- 038-NA
Standard
Aluminium Alloy to BS 1490
Natural
1-1/2" NST Female Thread
200L/min-(Jet) 280L/min-(spray)
14m(Jet)
8m(Spray)
WRS105-LA- 038-NA
With pistol grip
WRS103-GM- 038-NA
Standard
Copper Alloy to BS 1400
Natural
1-1/2" NST Female Thread
310L/min-(Jet) 400L/min-(spray)
17m(Jet)
10
Water / Foam Pistol Grip Nozzle (Jet / Fog)
Code No.
Material
Finishing
Inlet Size
Flowrate @ 65 Psi
Throwrange @ 65 Psi
FOS005-LA-38-NA
Aluminium Alloy
Natural
BS 336 Male Instantaneous
150-220-350-460 LPM
22m (Jet)
FOS005-GM-38-BK
Copper Alloy
40-60-95-125 GPM
14m (Spray)
This nozzle provides a combination fog and straight stream flow. Flowrate and flow pattern can be changed without shutting down. It is available in heavy duty bronze construction and also lightweight aluminium alloy construction. Flowrate can be adjusted from 150LPM to 460LPM. This nozzle provides excellent discharge in the application of AFFF and non-protein foam. Ideal for use with foam inductors. Aeration foam tube FOS011-LA-STD-NA is available to enhance expansion of foam solution and also deliver a longer and heavier foam blanket (expansion rate 8-1). Quick and easy attachment method is provided.
Handle Operated Monitor
CODE NO :
D E S C R I P T I ON
FOS007-SS-100-RD
• Suitable for flows up to 1000GPM • 2-1/2" NHT male outlet • 360 deg. Horizontal travel • Vertical 135 deg. (90 deg. above to 45 deg. below) • Locking device for horizontal and vertical position • Stainless steel handle for control horizontal and vertical position. • 3" stainless steel water way • 4" ANSI inlet flange
Handle Operated Monitor
CODE NO :
D E S C R I P T I ON
FOS047-GM-100-RD
• Suitable for flows up to 750GPM • 2-1/2" NHT male outlet • 360 deg. Horizontal travel • Vertical 135 deg. (90 deg. above to 45 deg. below) • Locking device for horizontal and vertical position • Stainless steel handle for control horizontal and vertical position. • Material construction Gun Matel • 4" ANSI inlet flange
Double Wheel Operated Monitor
CODE NO :
D E S C R I P T I ON
FOS045-GM-100-RD
• Suitable for flows up to 1000GPM • 2-1/2" NHT male outlet • 360 deg. Horizontal travel • Vertical 150 deg. (90 deg. above to 60 deg. below) • Horizontal and vertical position controlled by double handwheel driven worm gear • Material construction Gun Matel • 4" ANSI inlet flange
Portable Monitor
CODE NO :
D E S C R I P T I ON
FOS044-GM-100-NA
• Suitable for flows up to 1000GPM • 2-1/2" NHT male outlet • Carrying handle • Handwheel driven for vertical movement 70 above • 360 horizontal movement with twist lock • Inlet two 2-1/2" NHT female or with BS mal instantaneous
Oscillating Monitor
CODE NO :
D E S C R I P T I ON
FOS043-GM-100-NA
• Automatic horizontal oscillation when water pass through monitor • Oscillation angle adjustable in 15 steps from 30 to 120 • Oscillation speed adjustable from 2 to 10 per sec. • Manual movement 360 horizontal • Material of construction Gun Matel • 4" ANSI inlet flange
